diff --git a/src/LayerPlan.cpp b/src/LayerPlan.cpp
index 39f3e1b510..5cfdd1d9c2 100644
--- a/src/LayerPlan.cpp
+++ b/src/LayerPlan.cpp
@@ -2512,8 +2512,24 @@ void LayerPlan::writeGCode(GCodeExport& gcode)
     {
         ExtruderPlan& extruder_plan = extruder_plans_[extruder_plan_idx];
 
-        const RetractionAndWipeConfig* retraction_config
-            = current_mesh ? &current_mesh->retraction_wipe_config : &storage_.retraction_wipe_config_per_extruder[extruder_plan.extruder_nr_];
+        auto get_retraction_config = [&extruder_nr, this](std::shared_ptr<const SliceMeshStorage>& mesh) -> std::optional<const RetractionAndWipeConfig*>
+        {
+            if (mesh)
+            {
+                if (extruder_nr == mesh->settings.get<size_t>("extruder_nr")) [[likely]]
+                {
+                    return &mesh->retraction_wipe_config;
+                }
+
+                // We are printing a part of a mesh with a different extruder, use this extruder settings instead (mesh-specific settings will be ignored)
+                return &storage_.retraction_wipe_config_per_extruder[extruder_nr];
+            }
+
+            // We have no mesh yet, a more global config should be used
+            return std::nullopt;
+        };
+
+        const RetractionAndWipeConfig* retraction_config = get_retraction_config(current_mesh).value_or(&storage_.retraction_wipe_config_per_extruder[extruder_plan.extruder_nr_]);
         coord_t z_hop_height = retraction_config->retraction_config.zHop;
 
         if (extruder_nr != extruder_plan.extruder_nr_)
@@ -2697,7 +2713,7 @@ void LayerPlan::writeGCode(GCodeExport& gcode)
 
             if (path.retract)
             {
-                retraction_config = path.mesh ? &path.mesh->retraction_wipe_config : retraction_config;
+                retraction_config = get_retraction_config(path.mesh).value_or(retraction_config);
                 gcode.writeRetraction(retraction_config->retraction_config);
                 if (path.retract_for_nozzle_switch)
                 {