Does Heishamon go together with the standard panasonic controller CZ-RTC5B

[remcodegroot]

Hi!
I can't find any info on this, but if I have the CZ-RTC5B connected to my MDC09 together and want to control the heath pump using Heishamon. Doesn't this clash? Doesn't the CZ-RTC5B constantly overrule the Heishamon? Do I need to configure anything to make this possible?

[geduxas]

isn't cz-rtc5b is for AC unit's? How they should work in this setup?

[remcodegroot]

Maybe I have the type wrong. I searched for an image of what looked like the controller. And found that type ID. So please read it as "the controller that is connected to a Panasonic HP" and focus on the core of my question: Does the controller clash with Heishamon? And if so, how do I prevent this.

[geduxas]

Heatpump even don't work without remote controller .. so this question doesn't make any sense

[remcodegroot]

Ok, thank you for that information. So I don't (can't) disconnect it. But this does still doesn;t go to the core off my question. I'm assuming that it is the controller that normally controls the heat-pump. (It's in the name) . So if I now provide a ruleset to Heishamon to do the same. Won't the two (Controller and Heishamon) both try to control at the HP at the same time,causing the HP to get conflicting commands.

[geduxas]

No, controller is just interface to get/set settings in Heatpump. Scheduler is different story, Heatpump don't have any scheduler, so any scheduled task in remote controller is directly translated to commands for Heatpump. So same is with heishamon or Panasonic cloud.