WebGUI not starting ([Errno 98] Address already in use)

[snorro80]

Installed Pi-somfy on an RPI with latest Buster following the guide.
After installation webGUI can't be reached.
When manually starting the webserver i get the following error:
[Errno 98] Address already in use

Tried other port, eg 8082, no error on manual start but webGUI still can't be reached.

[firewiremb]

If you follow the commissioning instructions step by step (alternative 5 systemd service), the file operateShutters.conf is created in the directory /home/pi. Apparently this is not used.
The file with the same name in the path /home/pi/Pi-Somfy is used. To change the port for the web interface you have to edit here.

Since port 80 is already used on my Pi, I use port 10055.

[Nickduino]

Was it solved @snorro80 ?

[snorro80]

Haven't been able to try it due to holiday.
Will let you know if it worked as soon as I tried your solution.

[MichaelB2018]

The type-casting bugs that caused partial operations to fail (can't multiply sequence by non-int of type 'float' and '<' not supported between instances of 'int' and 'str') have been fixed in release 3.0 (PR #170). The web server and config modules were rewritten with proper numeric type handling for shutter durations and positions. Please re-test with the latest code and reopen if the issue persists.