WindTerm_ 2.6.0_ Prerelease 8, testing router and switch connectivity issues

[xuege6666]

WindTerm_ 2.6.0_ Prerelease 8, when connecting H3C switches, firewalls, and router devices,The conversation still has the issue of being disconnected and reconnecting by pressing enter

VeryCapture_20240115153306.mp4

[kingToolbox]

You mentioned that previous versions can connect in #2068, right? For example, can version 2.5.0 connect your routers normally?

[xuege6666]

You mentioned that previous versions can connect in #2068, right? For example, can version 2.5.0 connect your routers normally?

At 2.5.0, everything is normal when connecting the H3C switch router and firewall

[xuege6666]

You mentioned that previous versions can connect in #2068, right? For example, can version 2.5.0 connect your routers normally?

The following video is about connecting H3C switches, routers, and firewall devices in section 2.5.0. There is no problem with connecting network devices in section 2.5.0, but the connection is slightly slow

VeryCapture_20240115155541.mp4

[kingToolbox]

If possible, could you provide the log file for analysis? It's difficult for me to obtain more information solely from the image. The steps to generate the log are as follows:

• Open the ssh session property dialog.
• In Terminal / Logging, check the Log all session output.
• Reconnect to the host and wait Remote channel is closed.
• Open the folder WindTerm-Install-Path/profiles/default.v10/terminal/logs/Session-Name
• Confirm that the latest log file exists and contains content such as "ssh_connect".
• Zip the log file and upload in your comment.

In addition, please don't worry, the log will not record any private information such as usernames and password, and you can check this before uploading the log file. Thank you very much.

[xuege6666]

If possible, could you provide the log file for analysis? It's difficult for me to obtain more information solely from the image. The steps to generate the log are as follows:

* Open the ssh session property dialog.

* In `Terminal / Logging`, check the `Log all session output`.

* Reconnect to the host and wait `Remote channel is closed`.

* Open the folder `WindTerm-Install-Path/profiles/default.v10/terminal/logs/Session-Name`

* Confirm that the latest log file exists and contains content such as "ssh_connect".

* Zip the log file and upload in your comment.

In addition, please don't worry, the log will not record any private information such as usernames and password, and you can check this before uploading the log file. Thank you very much.

Hello, the following are the logs generated by connecting network devices, hoping to be helpful to you
192.168.251.225_22F_West_5130_2024-01-15_17-21-47.log

[kingToolbox]

Thank you very much for your detailed logs. I have analyzed the logs and should have fixed the related bugs. Please download the new version WindTerm_2.6.0_Prerelease_9 and use it, and let me know if there are still any problems.