Add LC7981 LCD 192X112 graph.#512
Open
Vidou12 wants to merge 126 commits into
Open
Conversation
Revert "Show UTF-8 human readable strings from source code to your ti…
via parallel interface
PSoC 5 support
Hardware SPI support for ATmega128
The .c files for the pbm bitmap-writing virtual devices contain constants for the output width and height. Previously these constants were used throughout the code, making it impossible to change the width and height without changing these constants. With this change, only the initialization uses the constants, but the rest of the code reads back the width and height from the device struct and uses those. This enables a user of these devices to change the width and height to change the size of the output. This was tested for all three of the pbm devices.
make pbm screen sizes less hardcoded
Expose u8g_GetGlyphDeltaX through the C++ API
Both of these lack a hardware TWI and only come with USI instead.
Add support for ATmega329P/ATmega3290P
fixes/stdout build fixes
To trigger a stop condition, the code sets the TWSTO bit, which is automaticaly cleared when the stop is copmleted. However, the code would call u8g_i2c_wait() to wait until the bit was *set*, not *cleared*. In most cases, the stop condition seems slow enough so the bit is not cleared and u8g_i2c_wait() is satisfied (though without waiting for the stop to be completed). However, in some cases the bit is already cleared, so u8g_i2c_wait stalls for the entire timeout and then sets a timeout error. In practice, these errors aren't usually checked, so this mostly causes some unneeded delays and not waiting for stop complete is probably not problematic either, but it is good to fix it anyway. This commit changes u8g_i2c_wait to allow waiting for a bit to be cleared in addition to it being set.
Fix timeout handling for u8g_i2c_stop()
Owner
|
Did you try u8g2? |
Add sleep support for st7920, mini12864, dogs102
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
9 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Hello.
I have an GraphLCD in 192112 px but i can't found an library to use it with arduino board.
Is-it possible to add it (an LC7981 in 192112 pixels) at your library ?
thx.
(My GLCD is an PB-PG192112-A-P2 (link))