Will this work for the ADS1013D by Yeapook?

[westerj]

At boot, it shows Yeapook ADS1013D High Performance

mounting up the internal USB storage Shows:

root@Frisbee-9480m:/media/westerj/0403-0201# ls -l | grep -v wav$ | grep -v bmp$
total 5024
-rw-r--r-- 1 westerj westerj 400000 Mar 22  2020 piclist.sys
-rw-r--r-- 1 westerj westerj   2000 Mar 22  2020 pic_system.sys
drwxr-xr-x 2 westerj westerj  32768 Sep 30  2021 System Volume Information
-rw-r--r-- 1 westerj westerj 400000 Mar 22  2020 wavelist.sys
-rw-r--r-- 1 westerj westerj   2000 Mar 22  2020 wave_system.sys
root@Frisbee-9480m:/media/westerj/0403-0201# cat wave_system.sys | od -c
0000000 003  \0 002  \0 001  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0
0000020  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0
*
0003720
root@Frisbee-9480m:/media/westerj/0403-0201# df -hP | grep sdb
/dev/sdb1                    7.4G  5.0M  7.4G   1% /media/westerj/0403-0201
root@Frisbee-9480m:/media/westerj/0403-0201# lsblk | grep sdb
sdb                     8:16   1   7.4G  0 disk 
└─sdb1                  8:17   1   7.4G  0 part /media/westerj/0403-0201
```### > root@Frisbee-9480m:/media/westerj/0403-0201# ls -l | grep -v wav$ | grep -v bmp$
> total 5024
> -rw-r--r-- 1 westerj westerj 400000 Mar 22  2020 piclist.sys
> -rw-r--r-- 1 westerj westerj   2000 Mar 22  2020 pic_system.sys
> drwxr-xr-x 2 westerj westerj  32768 Sep 30  2021 System Volume Information
> -rw-r--r-- 1 westerj westerj 400000 Mar 22  2020 wavelist.sys
> -rw-r--r-- 1 westerj westerj   2000 Mar 22  2020 wave_system.sys
> root@Frisbee-9480m:/media/westerj/0403-0201# cat wave_system.sys | od -c
> 0000000 003  \0 002  \0 001  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0
> 0000020  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0  \0
> *
> 0003720
> root@Frisbee-9480m:/media/westerj/0403-0201# df -hP | grep sdb
> /dev/sdb1                    7.4G  5.0M  7.4G   1% /media/westerj/0403-0201
> root@Frisbee-9480m:/media/westerj/0403-0201# lsblk | grep sdb
> sdb                     8:16   1   7.4G  0 disk 

Will this support your work?  
THanks!

[pecostm32]

For as far as I know yes, but checkout the work done by Atlan on EEVBlog. (https://www.eevblog.com/forum/testgear/fnirsi-1013d-100mhz-tablet-oscilloscope/msg5567245/#msg5567245)

He made several improvements. One of them is an option to boot either the original or the new firmware.