Script fails, if the folder pico_setup.sh is downloaded to, has a space in it's name

[protik09]

For example,
I download the script to a folder called "Embedded Projects" and it fails.

Error: ./pico_setup.sh: line 48: cd: too many arguments

Tried this in WSL (Ubuntu 20.04.2 LTS) and native Linux Mint 20.1 on Cinnamon - it fails in both

I fixed the issues in the script and can send a pull request if needed.

[aallan]

Tried this in WSL (Ubuntu 20.04.2 LTS) and native Linux Mint 20.1 on Cinnamon - it fails in both

The script is designed to run on an up to date installation of Raspberry Pi OS. It is not designed to run on other Linux installations, hence the warning message right at the start "Not running on a Raspberry Pi. Use at your own risk!"

[michaelstoops]

This is also a problem on Raspberry Pi OS:

mstoops@pod-gw ~/the dir/pico-setup
 % ./pico_setup.sh
...
Creating /home/mstoops/the dir/pico-setup/pico
./pico_setup.sh: line 48: cd: too many arguments
mstoops@pod-gw ~/the dir/pico-setup
 % uname -a
Linux pod-gw 5.10.17-v7+ #1403 SMP Mon Feb 22 11:29:51 GMT 2021 armv7l GNU/Linux
mstoops@pod-gw ~/the dir/pico-setup
 % cat /proc/cpuinfo
...
Hardware	: BCM2835
Revision	: a22082
Serial		: 00000000bcfe828d
Model		: Raspberry Pi 3 Model B Rev 1.2
mstoops@pod-gw ~/the dir/pico-setup
 % cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

[aallan]

Yup, and there is an existing PR to fix this, see #18.

[aallan]

So #18 has been superseded by #20. But note that one of openocd's submodules doesn't handle spaces and there doesn't seem to be a way around that?

[lurch]

But note that one of openocd's submodules doesn't handle spaces and there doesn't seem to be a way around that?

I'm now following that up with the relevant upstream project: msteveb/jimtcl#199