[issue]look like feishu not support armv7 32bit

[DZ2048]

2026/02/18 10:18:38 [2026-02-18T10:18:38Z] [ERROR] channels: Failed to initialize Feishu channel {error=feishu channel is not supported on 32-bit architectures (armv7l, 386, etc.). Please use a 64-bit system or disable feishu in your config}

[nikolasdehor]

This is likely because the Feishu/Lark SDK uses CGO or architecture-specific system calls that don't support ARMv7 32-bit.

Looking at the dependency chain:

• github.com/larksuite/oapi-sdk-go/v3 is pure Go and should work on ARMv7
• But if Feishu uses any native crypto or network features that rely on CGO, 32-bit ARM could be problematic

Could you share:

1. The exact error message (compile error vs runtime panic?)
2. Whether you're building with CGO_ENABLED=0 (recommended for cross-compilation)
3. The Go version and build command used

If it's a compile error, try: CGO_ENABLED=0 GOOS=linux GOARCH=arm GOARM=7 go build -o picoclaw cmd/picoclaw/main.go

Note: PR #452 adds an ARMv7 build target to the Makefile, which would help test this officially.

[DZ2048]

1. more info:
   ~ $ ~/.local/bin/picoclaw gateway

📦 Agent Status:
• Tools: 13 loaded
• Skills: 6/6 available
2026/02/19 13:41:50 [2026-02-19T13:41:50Z] [INFO] agent: Agent initialized {tools_count=13, skills_total=6, skills_available=6}
2026/02/19 13:41:50 [2026-02-19T13:41:50Z] [INFO] channels: Initializing channel manager
2026/02/19 13:41:50 [2026-02-19T13:41:50Z] [ERROR] channels: Failed to initialize Feishu channel {error=feishu channel is not supported on 32-bit architectures (armv7l, 386, etc.). Please use a 64-bit system or disable feishu in your config}
2026/02/19 13:41:50 [2026-02-19T13:41:50Z] [INFO] channels: Channel initialization completed {enabled_channels=0}
⚠ Warning: No channels enabled
✓ Gateway started on 0.0.0.0:18790
Press Ctrl+C to stop
✓ Cron service started
2026/02/19 13:41:50 [2026-02-19T13:41:50Z] [INFO] heartbeat: Heartbeat service started {interval_minutes=30}
✓ Heartbeat service started
2026/02/19 13:41:50 [2026-02-19T13:41:50Z] [INFO] devices: Device event service disabled or no sources
2026/02/19 13:41:50 [2026-02-19T13:41:50Z] [WARN] channels: No channels enabled
✓ Health endpoints available at http://0.0.0.0:18790/health and /ready
^C
Shutting down...
2026/02/19 13:41:54 [2026-02-19T13:41:54Z] [INFO] devices: Device event service stopped
2026/02/19 13:41:54 [2026-02-19T13:41:54Z] [INFO] heartbeat: Stopping heartbeat service
2026/02/19 13:41:54 [2026-02-19T13:41:54Z] [INFO] channels: Stopping all channels
2026/02/19 13:41:54 [2026-02-19T13:41:54Z] [INFO] channels: All channels stopped
✓ Gateway stopped

2. I use a samsung gt-n8000(Galaxy Note 10.1) and git and make install, i do not change this "CGO_ENABLED=0"
3. /picoclaw $ go versiongo version go1.25.6 android/arm
   and I change the go.mod "go 1.25.7" to "go 1.25.6", nothing more.
   and make install.

This is likely because the Feishu/Lark SDK uses CGO or architecture-specific system calls that don't support ARMv7 32-bit.

Looking at the dependency chain:

* `github.com/larksuite/oapi-sdk-go/v3` is pure Go and should work on ARMv7

* But if Feishu uses any native crypto or network features that rely on CGO, 32-bit ARM could be problematic

Could you share:

1. The exact error message (compile error vs runtime panic?)

2. Whether you're building with `CGO_ENABLED=0` (recommended for cross-compilation)

3. The Go version and build command used

If it's a compile error, try: CGO_ENABLED=0 GOOS=linux GOARCH=arm GOARM=7 go build -o picoclaw cmd/picoclaw/main.go

Note: PR #452 adds an ARMv7 build target to the Makefile, which would help test this officially.

[shisaq]

FYI, I tried Raspberry Pi Zero W with 32-bit system on Feishu, and failed to connect finally. When I used Raspberry 3B and installed a 64 bit system, it was no problem any more.

[sipeed-bot]

@DZ2048 Hi! This Issue has had no activity for over 2 weeks, so I'm closing it for now to keep things tidy. If it's still relevant, feel free to reopen it anytime and we'll pick it back up.