The module works correctly but the bottom row of LEDs seem to be malfunctioning.
S1 - S8 are working correctly (they show both red and green lights)
S9 - S14, 16 are stuck on green
S15 is stuck at off and only turns red when pressed, when the sequencer runs S15 shows a red flash like its supposed to but still no green lights on it.
The lights seem to be stuck in this state even while the module is booting up, S1 - S8 flash after the boot up finishes, S9 - S14, 16 are stuck on green from the start and S15 flashes red once the boot up finishes.
this is a new issue (it was not always like this, happened on a random day). Reinstalling the firmware via the micro sdcard did not fix it.
Any suggestions on how i could fix this? Im a little reluctant with trying to reflash the bootloader with a STLink or something because if i fuck that up then this thing will be bricked for good.
Thank you for developing this module and keeping it open source, your help is greatly appreciated.
The module works correctly but the bottom row of LEDs seem to be malfunctioning.
S1 - S8 are working correctly (they show both red and green lights)
S9 - S14, 16 are stuck on green
S15 is stuck at off and only turns red when pressed, when the sequencer runs S15 shows a red flash like its supposed to but still no green lights on it.
The lights seem to be stuck in this state even while the module is booting up, S1 - S8 flash after the boot up finishes, S9 - S14, 16 are stuck on green from the start and S15 flashes red once the boot up finishes.
this is a new issue (it was not always like this, happened on a random day). Reinstalling the firmware via the micro sdcard did not fix it.
Any suggestions on how i could fix this? Im a little reluctant with trying to reflash the bootloader with a STLink or something because if i fuck that up then this thing will be bricked for good.
Thank you for developing this module and keeping it open source, your help is greatly appreciated.
