Oxidized - Brocade ISL switche (EFOS OS) #3477
Description
- [ X] I have read and understood docs/Issues.md.
Describe the problem
I'm trying to use oxdized to back up the config of the Brocade switches. It's a Broadcom BES-53248 with EFOS OS. The OS is not supported, but i would really like if i could get some help to maybe set it up. I have tried different types of settings, but without any luck. I also tried the guide of making a new model, but it doesnt seem to work. I'm fairly new to Librenms/oxidized.
Initital setup was the the switch wouldnt even recognize the switch and turned up in Librenms as Inteno OS as per my understanding is that Librenms doesnt know the model either
Expected behavior
I would like to have Oxidized to ssh into the brocade ISL switch and pull the config
Configuration
N/A
Logs
metroswitch/switchname status no_connection, retry attempt 1
Mar 31 11:16:51 librenms oxidized[60951]: 10.226.16.37 raised IOError with msg "closed stream"
It cannot ssh to the switch since the switch will deny the SSH login due to expected different CMD, because of missing supported model.
Running environment (please complete the following information):
- OS: Ubuntu 24.04.2 LTS
- oxidized version: 0.30.1
- oxidized-web version:
- Manufacturer model an software version: n/a
- oxidized model name: n/a
Additional context
Initial SSH login:
- NetApp Reference Configuration File (RCF)
- Switch : BES-53248 (direct storage, L2 Networks, shared ISL), Filename : BES-53248_v2.11_Switch-A1.txt
- Date : Generator: v1.6c 2023-12-05_001, file creation: 2024-11-05, 08:18:03
- Platforms : 3: MetroCluster 1 : AFF-A150, ASA-A150, FAS2750, AFF-A220, FAS500f, AFF-C250, AFF-A250, ASA-A250
- Port Usage:
- Ports 01 - 02: Unused ports
- Ports 03 - 04: Unused ports
- Ports 05 - 06: Unused ports
- Ports 07 - 08: Unused ports
- Ports 09 - 10: MetroCluster 1, Cluster/MetroCluster Ports, VLAN 10, 103
- Ports 11 - 12: Unused ports
- Ports 13 - 16: MetroCluster ISL, VLAN 10, LAG 1/10, 10G / 25G
- Ports 17 - 48: Unused Ports, 10G / 25G
- Ports 49 - 54: Unused Ports, 100G
- Ports 55 - 56: Intra-Cluster ISL Ports, LAG 1/1, 100G
- NetApp Reference Configuration File (RCF)
- Switch : BES-53248 (direct storage, L2 Networks, shared ISL), Filename :
BES-53248_v2.11_Switch-A1.txt - Date : Generator: v1.6c 2023-12-05_001, file creation: 2024-11-05,
08:18:03 - Platforms : 3: MetroCluster 1 : AFF-A150, ASA-A150, FAS2750, AFF-A220,
FAS500f, AFF-C250, AFF-A250, ASA-A250 - Port Usage:
- Ports 01 - 02: Unused ports
- Ports 03 - 04: Unused ports
- Ports 05 - 06: Unused ports
- Ports 07 - 08: Unused ports
- Ports 09 - 10: MetroCluster 1, Cluster/MetroCluster Ports, VLAN 10, 103
- Ports 11 - 12: Unused ports
- Ports 13 - 16: MetroCluster ISL, VLAN 10, LAG 1/10, 10G / 25G
- Ports 17 - 48: Unused Ports, 10G / 25G
- Ports 49 - 54: Unused Ports, 100G
- Ports 55 - 56: Intra-Cluster ISL Ports, LAG 1/1, 100G
switchname>
Then you can type enable and then you will have the;
switchname#
CLI where you can run a "show running-config"
switchname# show ver
Switch: 1
System Description............................. EFOS, 3.12.0.1, Linux 5.4.2-c92ac1fd, 2016.05.00.06
Machine Type................................... BES-53248A1
Machine Model.................................. BES-53248
Serial Number.................................. QTFCU320800D4
Part Number.................................... 1IX8BXZ0000
Burned In MAC Address.......................... xx:xx:xx:xx:xx:xx
Software Version............................... 3.12.0.1
Operating System............................... Linux 5.4.2-c92ac1fd
Network Processing Device...................... BCM56873_A0
CPLD version................................... 0xff040c04
Additional Packages............................ BGP-4
QOS
Multicast
IPv6
Routing
Data Center
OpEN API
Prototype Open API